Scion IQ Forums banner
1 - 4 of 4 Posts

·
Registered
Joined
·
35 Posts
Discussion Starter · #1 · (Edited)
I cut the bottom off of an empty Rain-X washer fluid bottle and threaded it into the oil filler port. The neck fits almost perfectly into the oil filler port with just a little bit of looseness. ;)
17166


17167


Much better than the $50 solution from Harbor Freight! ;)
 
  • Like
Reactions: jzchen

·
Registered
Joined
·
123 Posts
Hm. I think I'm using a normal $5 long funnel from the auto parts store, something like this


Or this one (without the white part) - the wide neck usually stays put in wider openings:


Great idea though. Had to add a gas station - bought quart in emergency. Shooting from above was no fun and made plenty of mess.
 

·
Super Moderator
2014 Scion iQ
Joined
·
736 Posts
This is the one I use quite a bit, not specifically the iQ:


It doesn't have the adapters to fill cap threads like the Harbor Freight one but does have the measurement lines...
 

·
Registered
Joined
·
35 Posts
Discussion Starter · #4 ·
This is the one I use quite a bit, not specifically the iQ:


It doesn't have the adapters to fill cap threads like the Harbor Freight one but does have the measurement lines...
I'll have to include this with my CVT fluid exchange/fill. I'm almost ready to assemble everything and give it a go. ;)
 
  • Like
Reactions: jzchen
1 - 4 of 4 Posts
Top